DATASHEET DS_DNL04SIP16_11232010D FEATURES High efficiency: 95% @ 5.0Vin, 3.3V/16A out Small size and low profile: (SIP) 50.8mm x 13.4mm x 8.5m
DS_DNL04SIP16A_11232010D 10FEATURES DESCRIPTIONS (CON.) Over-Temperature Protection The over-temperature protection consists of circuitry that provi
DS_DNL04SIP16A_11232010D 11 The output voltage tracking feature (Figure 40 to Figure 42) is achieved according to the different external connections.
DS_DNL04SIP16A_11232010D 12 FEATURE DESCRIPTIONS (CON.) Sequential Start-up Sequential start-up (Figure 40) is implemen
DS_DNL04SIP16A_11232010D 13 THERMAL CONSIDERATIONS Thermal management is an important part of the system design.
DS_DNL04SIP16A_11232010D 14 THERMAL CURVES (CON.) DNL04S0A0R16(Standard) Output Current vs. Ambient Temperature an
DS_DNL04SIP16A_11232010D 15MECHANICAL DRAWING SMD PACKAGE (OPTIONAL) SIP PACKAGE
DS_DNL04SIP16A_11232010D 16PART NUMBERING SYSTEM DNL 04 S 0A0 R 16 P F D Product Series Input Voltage Numbers of Outputs Output Voltage Package Ty
DS_DNL04SIP16A_11232010D 2TECHNICAL SPECIFICATIONS (TA = 25°C, airflow rate = 300 LFM, Vin = 2.8Vdc and 5.5Vdc, nominal Vout unless otherwise noted
DS_DNL04SIP16A_11232010D 3 ELECTRICAL CHARACTERISTICS CURVES Figure 1: Converter efficiency vs. output current (3.3V out) Figure 2: Converter ef
DS_DNL04SIP16A_11232010D 4ELECTRICAL CHARACTERISTICS CURVES Figure 7: Output ripple & noise at 3.3Vin, 2.5V/16A out Figure 8: Output ripple &am
DS_DNL04SIP16A_11232010D 5 Figure 13: Turn on delay time at input turn on 5Vin, 3.3V/16A out Figure 14: Turn on delay time at input turn on 5Vin, 1.8
DS_DNL04SIP16A_11232010D 6ELECTRICAL CHARACTERISTICS CURVES Figure 19: Typical transient response to step load change at 2.5A/µS from 100% to 50% of
DS_DNL04SIP16A_11232010D 7ELECTRICAL CHARACTERISTICS CURVES Figure 23: Typical transient response to step load change at 2.5A/µS from 100% to 50%
DS_DNL04SIP16A_11232010D 8 TEST CONFIGURATIONS VI(+)VI(-)BATTERY2100uFTantalumLTO OSCILLOSCOPE Note: Input reflected-ripple current is measured with
DS_DNL04SIP16A_11232010D 9DESIGN CONSIDERATIONS (CON.) The power module should be connected to a low ac-impedance input source. Highly inductive sou
Kommentare zu diesen Handbüchern