Delta-electronics RTU-DNET Bedienungsanleitung PDF herunterladen (Seite 16)

DeviceNet Remote I/O Communication Module RTU-DNET

DVP-PLC Application Manual

Attribute

Access

rule

Name Range Default Explanation

61 Get/Set

Output data

length for

module 6

N/A N/A

Length of output data of special

module 6

62 Get/Set

Start CR for

module 7

output data

N/A N/A

Start CR for the output data of special

module 7

63 Get/Set

Output data

length for

module 7

N/A N/A

Length of output data of special

module 7

64 Get/Set

Start CR for

module 8

output data

N/A N/A

Start CR for the output data of special

module 8

65 Get/Set

Output data

length for

module 8

N/A N/A

Length of output data of special

module 8

 Class 0x9C – Extension module parameter object

Class attribute

Attribute ID Access rule Name Data type

1 Get Revision UINT

2 Get MaxInstance UINT

Instance 1 ~ 8 (CR for the 1

~ 8

special module)

Attribute ID Access rule Name Data type

1 Get Content in CR#0 UINT

Get/Set

Content in CR#1 UINT

Get/Set

Content in CR#2 UINT

… … … UINT

Get/Set

Content in CR#8 UINT

Get/Set

Content in CR#9 UINT

… … … UINT

Note:

z When you modify the content in CR of the special module through DeviceNet, please read out the

content again (Get_Attribute_Single) after the modification and confirm that it has been modified

successfully.

z The content in some CRs of the special module cannot be modified. Therefore, please pay attention

to these parameters when you are modifying them.

4.3 DeviceNet I/O Mapping Data

1. Control word and status word in RTU-DNET

 Control word

bit Status value Explanation

0 Setting RTU-DNET to STOP mode

1 Setting RTU-DNET to RUN mode

1 0/1 Reserved

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 40 41

Kommentare zu diesen Handbüchern

Keine Kommentare

Delta-electronics RTU-DNET Bedienungsanleitung Seite 16

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Hardware Delta-electronics RTU-DNET