Delta Electronics RTU-EN01 Bedienungsanleitung PDF herunterladen (Seite 60)

Ethernet Communication Module DVPEN01-SL

6.14 RTU Mapping

Application

Using RTU mapping to read/write the remote digital I/O and analog I/O registers.

DVP28SV+DVPEN01-SLRTU-EN01+DVP06XA+DVP16SP

Network

environment

(1) Adopt a static IP address.

(2) IP address of DVPEN01-SL: 192.168.1.90

(3) IP address of RTU-EN01: 92.168.1.91

(4) Use DCISoft for RTU-EN01and check 10 mapping data for read and 10 mapping data for write.

(5) Set the mapping start address and number of data for RX, RY, RCR (read) and RCR (write) at

DVPEN01-SL.

(6) Enable the mapping function in DVP-SV PLC at DVPEN01-SL. Use M2000 and D2000 in DVP-SV

to read and M3000 and D3000 to write the value in the remote RTU-EN01.

1. Please refer to section 6.1 for more information about setting communication.

2. Use DCISoft for RTU-EN01 to set mapping control registers used for reading/writing.

DVP-PLC Operation Manual

1 2 ... 55 56 57 58 59 60 61 62

Keine Kommentare

Delta Electronics RTU-EN01 Bedienungsanleitung Seite 60