6
Function
Step
Copy HMI program to PCC
TPPCC
Copy program in PCC to HMI PCCTP
1 Turn the switch on the PCC to RD Turn the switch on the PCC to WR
2
Insert the PCC into the extension slot of
TP
Insert the PCC into the extension slot of
TP
3 Input the power to TP Input the power to TP
4
It will display “remove PCC” on the
screen and power on again
It will display “remove PCC” on the
screen and power on again
HMI Display Message
Copy HMI program to PCC (TPPCC) Copy PCC program to HMI (PCCTP)
If the model type of TP does not correspond
with the model type of program of PCC, TP will
display “TP series and PCC is different Press
Enter to Confirm TP seriesPCC Press Esc
to Exit”.
If there is no program in PCC, TP will display
“The PCC is Empty PCCTP series is illegal”.
TP will display “TP PCC series Please wait !”
during transmission.
TP will display “PCCTP series Please wait !”
during transmission.
Password Functions
1. If the password is forgotten, the password may be cleared using the following code: 8888.
This universal code will clear the password and all internal programs of TP02. The TP02 will
be re-set to the factory settings.
2. Users may use 0~9 and A~Z as characters for the password. Users must use the function
keys F0~F9 to input the password characters.
F0: scrolls in a loop as follows 0 A B C D E F 0
F1: scrolls in a loop as follows 1 G H I J K 1
F2: scrolls in a loop as follows 2 L M N O P 2
F3: scrolls in a loop as follows 3 Q R S T U V 3
F4: scrolls in a loop as follows 4 W X Y Z 4
F5: it just can be used to be constant 5.
F6: it just can be used to be constant 6.
F7: it just can be used to be constant 7.
F8: it just can be used to be constant 8.
F9: it just can be used to be constant 9.
Hardware Operation
The steps to Startup the TP02G:
1. Connect power wires,
2. Apply 24V DC power,
3. Enter into the startup display,
4. Enter the user-designed program
5. Press ESC key and hold on for 5 seconds, you could return to system menu.
There are five selections in the system menu and are described below.
(189 Seiten)
(11 Seiten)
(16 Seiten)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern